"hoja de cobre rodada 8um"

Single Side Red Thickness 12um Copper Foil Rolls Quickly details . Low profile and Single side side treatment in red. . Thickness: 12um . Width: ≤520 mm . Length: ≤5000 M . ID: 76 mm,152 mm . Alloy: C11000 Features: 1. Red color 2. Good performance in resistant to bending suitable for FCCL. 3. High density performance leads to high flexibility Application: Suitable for FCCL, FPC, COVERLAY, BONDING FILM TDS for FPC FCCL with all thickness. Thickness 0.10/0.012/0.018/0.025/0

600mm Width Non Weldable High Purity Nickel Plated Copper Foil 1. Description Nickel has strong passivation ability due to its high stability in the air. It can form a very thin passivation film in the air which can resist atmospheric alkali and some acid corrosion. It makes nickel plated product with good chemical stability during working or under alkaline environment. Nickel plated product is not easy to change color and can be oxidized when the temperature is above 600℃

Weldable High Precision 0.05mm Nickel Plated Copper Foil 1. Description Due to the high surface hardness of nickel plating product, electroplating nickel crystal is extremely small and has highly polished which can polish to mirror surface appearance. And it can keep clean for a long time in the atmosphere. So it often is used to decorate. 2. Base Material: High-precision Rolled Copper Foil (JIS:C1100/ASTM:C11000) Cu content more than 99.96% 3. Thickness 0.05mm 4. Base

1300mm Width Double Conductive Electrolytic Copper Foil Features Improve the consistency of battery usage group and reduce battery cost significantly. Improve the adhesion of active material and the collector, and reduce the electrode manufacturing cost. Reduce the polarization, increase the rate and capacity, improve the battery performance. Protection of fluid collection, extend battery life. Possess Japan Fuji coating machine, slitting machine and automatic computer

Single Side Rolled Thickness 0.035mm Nickel Plated Copper Foil 1. Description Nickel has strong passivation ability because its high stability in the air. It can form a very thin passivation film in the air which can resist atmospheric alkali and some acid corrosion. It makes nickel plated product with good chemical stability during working or under alkaline environment. Nickel plated product is not easy to change color and can be oxidized when the temperature is above 600℃

CCL Thickness 9 Micron Red PCB Copper Foil Description: CCL/PCB electrolytic copper foil are classified as :Standard electrolytic copper foil(STD),High-temperture elongation of the copper foil( HTE) ,ultra-low contour copper foil(VLP), flexible copper foil(FCF),inversion of opper foil(RTF).Ordinary thickness of the ED copper foils are 9 microns and 12 microns ,18 microns,35 microns etc. The maximum width of the ED copper foil iw 1370mm(53.93inch),.Also we can do special

FPC FCCL FPCB 25μm 70μm Thin RA Copper Foil Dimension Range: Copper Foil thickness from 12~100µm can be supplied for FPC. Width can be made according to clients’ requirement up to 650mm. Applications: Flexible Copper Clad Laminate(FCCL), Fine Circuit FPC, LED coated crystal thin film, FPCB. Features: The material has higher extensibility, and has a high bending resistance and no crack. Table 1:FPC T2 high flex rolled copper foil properties (GB/T5230-2000,IPC-4562-2000) Item

RF MRI Wall 3oz Thickness Shielding ED Copper Foil Copper Foil Shielding Features: 1. Lightweight (compared with other shielding materials) 2. Copper with 1320mm width or wider , can be more easy to install, especially for roofing, wall and floor. 3. Can be used with either a monolithic RF Floor (moisture resistance) or a modular RF Floor. 4. Copper Serves as an eddy current shield for EMI Protection. 5. RF shielding for MRI rooms is necessary to prevent RF noise from

Width 100mm High Precision ED Ultra Thin Copper Foil Produict Information : We can provide the specific single matte.double matte,and double shiny ED copper foil with the nominal thickness from 8um to 35um for the li-ion battery;the width is from 100mm to 1300mm.and the double shiny ED copper foil has the characteristics of the both sides. Features​ 1. the metal density nearing the copper theoretical density,very low surface profile,and high elongation and tensile strength; 2